Many people have very limited understanding of small fuel dispensers. Today, let's take a look at how to install the power supply in the tanker accessories and ask him, I hope you can have more understanding.
Tankerning asosiy quvvat kaliti bino ichida joylashgan bo'lishi kerak va kalit sug'urtasi vosita ishga tushirilganda (taxminan 6A) oqimga qarab aniqlanishi kerak. Elektr shnuri ikki marta yaxshi yog'ga chidamliligi va korroziyaga chidamliligi bo'lgan besh{1}}yadroli va ko'p{2}}torli mis yadrolari bilan himoyalangan bo'lishi kerak.
When using a single-phase motor, the user's power cord should be a copper core sheathed wire with a cross-sectional area of not less than 6 square millimeters, otherwise it may cause the motor to fail to start or even burn out the motor. The use of single-strand wires and aluminum core wires is prohibited.
Elektr taqsimlash xonasi va yonilg'i dispenseri o'rtasidagi aloqa liniyasi avtomobilning chiziqdan chiqib ketishiga yo'l qo'ymaslik uchun korpusga ko'milgan. Tanker tagining teshigidan oʻtuvchi kabelning chiqish joyida poʻlat quvurga yogʻ tomchilab tushishi va kabelning korroziyasini oldini olish uchun ochiq moy{0}}chidamli tirsak oʻrnatilgan. Yong'in yoqilg'i quyish shoxobchasi xavfsizligiga xavf tug'diradi.
The user's power cord is connected to the explosion-proof junction box of the fuel dispenser, which should correspond to the three-phase power supply and ground wire of the junction box of the machine. After the cable is put into the box, the screw plug should be tightened, and the cable must be clamped to ensure the explosion-proof of the junction box. performance.
Yog 'nasosi to'g'ri burilmagan bo'lsa, shunchaki A. b.ni burang. C ning uch fazali chizig'idan istalgan ikkitasi almashtirilishi mumkin. Bu masala sotuvchi tomonidan amalga oshirilishi kerak.
Yoqilg'i tarqatuvchisi alohida tuproqli sim bilan jihozlangan bo'lishi kerak va sinov tuproq qarshiligi 4 ohmdan oshmasligi kerak.
